1) Find the model of your stereo and contact XTRONS SUPPORT for the 'Firmware Update Link'. 2) Download the files: They are placed into a .zip or RAR format. You will need to use software such as winrar or 7 Zip to extract them onto the root of your SD card. These are the files you will get: wince files.png. Hi , First thread so here goes, I have recently bought a mk2 2003 punto 1.2 active with the speedo not working, I was told its probably an ABS sensor? However, i have noticed the abs light didnt illuminate when i put the ignition on so i replaced the binacle with a second hand one. The touch screen of your Fiat Punto switches on and off for no reason: In this scenario it is highly likely that you are the victim of a short circuit. Verify the state of your fuses and connectors, if you can’t discover anything, take your car to a car electrician who can fix the problem. If perhaps you have any additional questions about Jan 31, 2021. #1. Hi, My 06 Grande Punto has just failed its MOT because the screen washer is not working. When I pull or push the screenwash stalk I can't hear the screenwasher pump working at all and no jets of water but the wipers will still go through their cycle. The car is going in for a new pump on Monday, but I've been reading away Fiat Strada 5th-gen 278 (models since 2013); Fiat Qubo (models from 2008 to 2012); Peugeot Bipper (models from 2008 to 2017); RAM 700 Club Cab (models since 2014). Need not be soldered to the board but press-fitted to a dedicated connector. SEPDISP37 replaces Minitools SEI-DISP100 display. Dimensions: 73,5x44mm. Fiat Punto Mk2 ESP Traction control warning light - it is likely that this warning symbol will flash when driving over surfaces with low traction such as snow/ice or gravel roads. If the light is illuminated in normal driving conditions then there is a fault in this system. You can diagnose this with the iCarsoft i950 Fiat OBD Code Reader. Hopefully you haven't replaced the bulb just yet as its not necessarily the bulb - it could be a number of things, this guide will be looking at the multi-plug connector into the tail-light. What you need; - Philips head screw driver. - Something plastic and thin to lodge out the tail light. - Electrical contact cleaner / WD40. 2. Points. 1. Nov 21, 2008. #1. Hi All, I got into my 57 Grande Punto 1.2 this morning and the ventilation fan doesn't work on any setting but 4. It was fine last time I used it. Tried looking at the fuse list to check this, but can't see which one it could be. .

fiat punto display not working